Welcome to Epoxy Empourium
Oops! Page Not Found.
Sorry but we are unable to find the page that you are looking for.
Back to Home
?? Go up: /usr
#!/usr/bin/perl -T
#------------------------------------------------------------------------------
# This is amavisd-nanny, a program to show the status
# and keep an eye on the health of child processes in amavisd-new.
#
# Author: Mark Martinec <Mark.Martinec@ijs.si>
#
# Copyright (c) 2004-2014, Mark Martinec
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# The views and conclusions contained in the software and documentation are
# those of the authors and should not be interpreted as representing official
# policies, either expressed or implied, of the Jozef Stefan Institute.
# (the above license is the 2-clause BSD license, also known as
# a "Simplified BSD License", and pertains to this program only)
#
# Patches and problem reports are welcome.
# The latest version of this program is available at:
# http://www.ijs.si/software/amavisd/
#------------------------------------------------------------------------------
use strict;
use re 'taint';
use warnings;
no warnings 'uninitialized';
use Errno qw(ESRCH ENOENT);
use POSIX qw(strftime);
use Time::HiRes ();
use BerkeleyDB;
use vars qw($VERSION); $VERSION = 1.401;
my($idlettl) = 3*60*60; # idle children are sent a SIGTERM
# after this many seconds
my($activettl) = 10*60; # stuck active children are sent a SIGTERM
# after this many seconds
my($dbfile) = 'nanny.db';
my($db_home) = # DB databases directory
defined $ENV{'AMAVISD_DB_HOME'} ? $ENV{'AMAVISD_DB_HOME'} : '/var/spool/amavisd/db';
my($wakeuptime) = 2; # -w, sleep time in seconds, may be fractional
my($repeatcount); # -c, repeat count (when defined)
sub fmt_age($$$) {
my($t,$state_bar,$idling) = @_;
$t = int($t);
my($char) = $idling ? '.' : '=';
my($bar_l) = $idling ? $t : length($state_bar);
my($bar) = substr( ($char x 9 . ':') x 3 . $char x 5, 0,$bar_l);
if (!$idling) {
$state_bar = substr($state_bar,0,length($bar)-2) . substr($state_bar,-1,1)
. '>' if length($state_bar) > length($bar);
for my $j (0 .. length($bar)-1) {
substr($bar,$j,1) = substr($state_bar,$j,1)
if substr($bar,$j,1) eq '=' && substr($state_bar,$j,1) ne ' ';
}
}
my($s) = $t % 60; $t = int($t/60);
my($m) = $t % 60; $t = int($t/60);
my($h) = $t % 24; $t = int($t/24);
my($d) = $t;
my($str) = sprintf("%d:%02d:%02d", $h,$m,$s);
$str = (!$d ? " " : sprintf("%dd",$d)) . $str;
$str . ' ' . $bar;
};
# main program starts here
my($normal_termination) = 0;
$SIG{INT} = sub { die "\n" }; # do the END code block when interrupted
while (@ARGV) {
my($opt) = shift @ARGV;
my($val) = shift @ARGV;
if ($opt eq '-w' && $val =~ /^\+?\d+(?:\.\d*)?\z/) { $wakeuptime = $val }
elsif ($opt eq '-c' && $val =~ /^[+-]?\d+\z/) { $repeatcount = $val }
else {
print <<'EOD';
States legend:
A accepted a connection
b begin with a protocol for accepting a request
m 'MAIL FROM' smtp command started a new transaction in the same session
d transferring data from MTA to amavisd
= content checking just started
G generating and verifying unique mail_id
D decoding of mail parts
V virus scanning
S spam scanning
P pen pals database lookup and updates
r preparing results
Q quarantining and preparing/sending notifications
F forwarding mail to MTA
. content checking just finished
sp space indicates idle (elapsed bar is showing dots)
EOD
die "Usage: $0 [-c <count>] [-w <wait-interval>]\n";
}
}
print <<'EOD';
process-id task-id elapsed in elapsed-bar (dots indicate idle)
or state idle or busy
EOD
my(%waittime); # associative array on pid
my($env,$db,$old_db_inode,@dbstat,$cursor);
my(%proc_last_timestamp, %proc_state_bars);
for (;;) {
last if defined $repeatcount && $repeatcount <= 0;
@dbstat = stat("$db_home/$dbfile");
my($errn) = @dbstat ? 0 : 0+$!;
$errn==0 || $errn==ENOENT or die "stat $db_home/$dbfile: $!";
if (defined $db && $old_db_inode != $dbstat[1]) {
$db->db_close==0 or die "BDB db_close error: $BerkeleyDB::Error $!";
undef $db;
printf STDERR ("Reopening nanny database %s/%s\n", $db_home,$dbfile);
}
if (!defined $db && $errn==0) {
$old_db_inode = $dbstat[1];
$env = BerkeleyDB::Env->new(
-Home => $db_home, -Flags => DB_INIT_CDB | DB_INIT_MPOOL,
-ErrFile => \*STDOUT, -Verbose => 1);
defined $env or die "BDB no env: $BerkeleyDB::Error $!";
$db = BerkeleyDB::Hash->new(-Filename => $dbfile, -Env => $env);
defined $db or die "BDB no dbN 1: $BerkeleyDB::Error $!";
}
$| = 0;
my(%proc_timestamp, %proc_state, %proc_task_id);
my($stat,$key,$val); my($now);
my($eval_stat,$interrupt); $interrupt = '';
if (!defined $db) {
printf STDERR ("No nanny database %s/%s; waiting...\n",
$db_home,$dbfile);
} else {
$repeatcount-- if defined $repeatcount && $repeatcount > 0;
print "\n";
my($h1) = sub { $interrupt = $_[0] };
local(@SIG{qw(INT HUP TERM TSTP QUIT ALRM USR1 USR2)}) = ($h1) x 8;
eval {
$cursor = $db->db_cursor; # obtain read lock
defined $cursor or die "db_cursor error: $BerkeleyDB::Error";
$now = Time::HiRes::time; local($1,$2);
my($now_utc_iso8601) = strftime("%Y%m%dT%H%M%S",gmtime(int($now)));
while ( ($stat=$cursor->c_get($key,$val,DB_NEXT)) == 0 ) {
if ($val !~ /^(\d+(?:\.\d*)?) (.*?) *\z/s) {
print STDERR "Bad db entry: $key, $val\n";
} else {
$proc_timestamp{$key} = $1; my($task_id) = $2;
$proc_state{$key} = $1 if $task_id =~ s/^([^0-9])//;
$proc_task_id{$key} = $task_id;
if (!exists $proc_state_bars{$key}) { # new process appeared
$proc_last_timestamp{$key} = $proc_timestamp{$key};
$proc_state_bars{$key} = '';
}
}
}
$stat==DB_NOTFOUND or die "c_get: $BerkeleyDB::Error $!";
$cursor->c_close==0 or die "c_close error: $BerkeleyDB::Error";
$cursor = undef;
};
my($eval_stat) = $@;
if (defined $db) {
$cursor->c_close if defined $cursor; # unlock, ignoring status
$cursor = undef;
}
}
if ($interrupt ne '') { kill($interrupt,$$) } # resignal, ignoring status
elsif ($eval_stat ne '') { chomp($eval_stat); die "BDB $eval_stat\n" }
for my $key (keys(%proc_state_bars)) { # remove old entries
if (!exists($proc_timestamp{$key})) {
delete $proc_timestamp{$key};
delete $proc_task_id{$key};
delete $proc_state_bars{$key};
}
}
my(@to_be_removed,@killed);
for my $pid (sort {$a<=>$b} keys %proc_timestamp) {
$proc_state{$pid} = ' ' if $proc_state{$pid} eq '';
my($idling) = $proc_task_id{$pid} eq '' &&
$proc_state{$pid} =~ /^[. ]?\z/s;
my($age) = $now - $proc_timestamp{$pid};
if ($idling) { $proc_state_bars{$pid} = '' }
else {
$proc_state_bars{$pid} = ''
if $proc_timestamp{$pid} ne $proc_last_timestamp{$pid};
my($len) = int($age+0.5);
$len = 1 if $len < 1;
my($str) = $proc_state_bars{$pid};
if ($len > length($str)) { # replicate last character to desired size
my($ch) = $str eq '' ? '=' : substr($str,-1,1);
$str .= $ch x ($len - length($str));
}
substr($str,$len-1,1) = $proc_state{$pid};
$proc_state_bars{$pid} = $str;
}
$proc_last_timestamp{$pid} = $proc_timestamp{$pid};
my($ttl) = $idling ? $idlettl : $activettl;
my($n) = kill(0,$pid); # test if the process is still there
if ($n == 0 && $! != ESRCH) {
die "Can't check the process $pid: $!";
} elsif ($n == 0) { # ESRCH means there is no such process
printf STDERR ("PID %s: %-11s went away %s\n",
$pid, $proc_task_id{$pid} || $proc_state{$pid},
fmt_age($age, $proc_state_bars{$pid}, $idling) );
push(@to_be_removed, $pid);
} elsif ($age <= $ttl) { # all ok
printf STDERR ("PID %s: %-11s %s\n",
$pid, $proc_task_id{$pid} || $proc_state{$pid},
fmt_age($age, $proc_state_bars{$pid}, $idling) );
} else { # send a SIGTERM
printf STDERR ("PID %s: %-11s terminated %s\n",
$pid, $proc_task_id{$pid} || $proc_state{$pid},
fmt_age($age, $proc_state_bars{$pid}, $idling) );
if (kill('TERM',$pid) || $! == ESRCH) { push(@killed,$pid) }
else { warn "Can't SIGTERM $pid: $!" }
}
}
if (@to_be_removed) {
local($SIG{'INT'}) = 'IGNORE';
$cursor = $db->db_cursor(DB_WRITECURSOR); # obtain a write lock
defined $cursor or die "BDB db_cursor error: $BerkeleyDB::Error";
for my $key (@to_be_removed) {
my($val); my($stat) = $cursor->c_get($key,$val,DB_SET);
$stat==0 || $stat==DB_NOTFOUND
or die "BDB c_get: $BerkeleyDB::Error, $!.";
if ($stat==0) { # remove existing entry
$cursor->c_del==0 or die "BDB c_del: $BerkeleyDB::Error, $!.";
}
}
$cursor->c_close==0 or die "BDB c_close error: $BerkeleyDB::Error";
$cursor = undef;
}
my($delay) = 1; # seconds
while (@killed) {
Time::HiRes::sleep($delay); $delay = 2;
for my $pid (@killed) {
$waittime{$pid}++;
printf STDERR ("PID %s: sending SIGKILL in %d s\n",
$pid, 30-$waittime{$pid});
if ($waittime{$pid} > 30) { # send a SIGKILL
kill('KILL',$pid) or $! == ESRCH or warn "Can't SIGKILL $pid: $!";
$waittime{$pid} = 0;
} elsif (kill(0,$pid)) { # process is still there
} elsif ($! != ESRCH) { # problem?
warn "Can't check process $pid: $!";
} else { # no longer around
printf STDERR ("PID %s: %-11s successfully killed\n", $pid);
delete($waittime{$pid});
$pid = undef;
}
}
@killed = grep {defined} @killed;
printf STDERR ("Waiting for the process to terminate: %s\n",
join(', ',@killed)) if @killed;
}
$| = 1;
last if defined $repeatcount && $repeatcount <= 0;
Time::HiRes::sleep($wakeuptime) if $wakeuptime > 0;
} # forever
$normal_termination = 1;
END {
if (defined $db) {
$cursor->c_close if defined $cursor; # ignoring status
$db->db_close==0 or die "BDB db_close error: $BerkeleyDB::Error $!";
}
print STDERR "exited\n" if !$normal_termination;
}
Sorry but we are unable to find the page that you are looking for.
Back to Home